tenG long
Continuous anaerobic cracking equipment
Pyrolysis is a highly complex reaction process that utilizes the thermainstability of organic matter in waste. Under anaerobic or oxygen deficienconditions and certain temperature conditions,large molecular organimatter is transformed into gaseous,liquid,and solid components witrrelatively small molecular weights through the combined action odecomposition and condensation. it is composed of a series of chemical anphysical transformations.
-

Industrial waste
-

Waste plastic
-

Oil sludge
-

Waste rubber
-

Waste tires
TENG LONG
Production line

Used Tires

Plastic

Dumpsite

Negative Pressure Continuous Equipment
Tire oil 40%
More explanations
Steel wire 35%
More explanations
Carbon black 20%
More explanations
Gas 5%
More explanations

Continuous anaerobic cracking equipment
Tire oil 50%
More information
Carbon black 30%
More information
Waste metals 15%
More information
Gas 5%
More information

Continuous anaerobic cracking equipment
Rubber reinforcing agent 40%
More information
Industrial pigments 30%
More information
Plastic color masterbatch
More information
Asphalt 10%
More information
About us
Tenglong Hongye
01
High Cracking Efficiency
High cracking efficiency The continuous production line adopts a 24-hour non-stop operation mode, with three core advantages: first, the intelligent assembly line design realizes doubled production capacity, with the daily output increased compared with traditional equipment; second, the innovative energy consumption management system reduces unit energy consumption, achieving green production and economic benefits simultaneously; third, the patented pressing process stabilizes the oil yield of raw materials at 40%-42%, which is the industry level, significantly improving resource utilization. The entire system embodies the remarkable characteristics of modern production equipment, such as high efficiency, energy saving and good profitability.
02
Sustainable Development
Sustainable Development The crude oil produced by the system can be converted into multi-grade energy products through refining processes, including clean diesel oil, gasoline that meet national standards, and industrial-grade cutting oil. The carbon black produced simultaneously can be used as high-quality color masterbatches and tire reinforcing agents. Through an intelligent grading system, it can be accurately processed to the mesh size range specified by customers, realizing customized production from raw materials to finished products.
03
Equipment Safety and Reliability
Equipment Safety and Reliability This fully continuous production equipment adopts a multiple safety protection system. Through the intelligent temperature control system and explosion-proof design, it completely avoids potential safety hazards such as high-temperature furnace explosion in traditional processes. It has built a fully closed-loop automated production line covering automatic raw material conveying → intelligent sorting → pressing and extraction → waste residue treatment → carbon black grading. The allocation of key personnel is reduced compared with traditional production lines, and the entire system has achieved a dual breakthrough in "intrinsic safety + intelligent production".
04
Environmentally Friendly Emissions
This equipment features a fully enclosed anti-pollution design, establishing a closed-loop production system that covers the entire process from raw material input → high-temperature cracking → residue discharge. It incorporates three major environmental technology breakthroughs: A negative-pressure sealing system ensures zero dust leakage. Emission indicators (covering denitrification, flue gas cooling, baghouse dust removal, desulfurization, and activated carbon adsorption) fully comply with standards. It truly achieves the goal of "smokeless production and dust-free factory operations," realizing clean production.
TENG LONG
Differences
Fully continuous equipment
● 50-70 tons per day
VS
1-15 tons per day
● No cooling required, with continuous feeding and discharging
VS
6-8 hours for cooling per furnace
● Self-produced combustible gas covers 70% of energy consumption
VS
External fuel needs to be purchased.
● Pretreated and extracted without high-temperature oxidation
VS
Pulled out after high temperature, the quality deteriorates.
● The direction encouraged by the state
VS
Be phased out
Batch-type equipment
TENG LONG
Customer Case
Full-link tire pyrolysis equipment
Panzhihua equipment installation site
Shandong equipment installation site
Fujian equipment installation site
Equipment installation site in Nigeria
Equipment installation site in Indonesia
Belgian equipment installation site
Monaco equipment installation site
一 TENG LONG
TECHNICAL TEAM
Tenglong Hongye serves as the industry university researchcooperation base of Guizhou University of Mechanical andElectrical Engineering
This project is led by Guizhou Vocational and Technical College of Mechanical and ElectricalEngineering, with a total of 13 technical personnel from multiple research institutions includingmetallurgy, chemical engineering, and waste incineration power generation research institutesparticipating in the development.
Is there an upper limit on the hardness and viscosity of materials? For example, will high-hardness materials (such as rigid plastics) lead to increased equipment wear? Will high-viscosity materials (such as oil sludge) cause blockages?
There is an upper limit. High-hardness materials (such as rigid plastics) may exacerbate equipment wear; high-viscosity materials (such as oil sludge) are prone to causing blockages in pipelines or reactors and need pretreatment to reduce their viscosity.
Are there differences in the pretreatment steps for different materials? For example, do waste tires need to have their steel wires removed in advance? Does biomass need to be dried to a specific moisture content?
There are differences. Waste tires need to have their steel wires removed and be crushed; biomass needs to be dried to a moisture content of less than 10%; plastics need to have metal impurities removed; oil sludge needs to be dehydrated and deslagged. Pretreatment is customized according to the characteristics of the materials.
Are there any requirements for the particle size/dimension of materials? For example, do solid materials need to be crushed to a certain particle size or below? What is the maximum allowable particle diameter?
Yes, there are requirements. Solid materials usually need to be crushed to a specific particle size (e.g., 5-50 mm, depending on the equipment model), and the maximum allowable particle diameter generally does not exceed 100 mm to avoid clogging or insufficient cracking.
Which materials are explicitly prohibited from being processed by the equipment? (Such as certain categories of hazardous waste, explosives, etc.)
The materials explicitly prohibited from processing include: explosives (such as dynamite, nitrocellulose), strong oxidizers (such as peroxides), highly corrosive substances (such as concentrated acids/alkalis), materials containing highly toxic components (such as pesticide residues, cyanides), radioactive waste, as well as some hazardous wastes with high chlorine/fluorine content and uncontrollable pollution (such as large quantities of unpretreated mixed PVC waste).
How is the cracking efficiency of different types of materials in continuous anaerobic cracking equipment?
There is a significant difference in cracking efficiency among different materials: Plastics (such as PE and PP) have relatively high efficiency (80%-90%) and are easy to be converted into fuel oil; Rubber and waste tires come next (70%-80%), but their efficiency is affected by the need to handle impurities; Biomass (such as straw) has lower efficiency (50%-70%), which is affected by its fibrous structure and ash content; Materials containing chlorine and high impurities (such as PVC and oil sludge) have even lower efficiency and require pretreatment, otherwise their efficiency is prone to decrease.
TENG LONG
Tire pyrolysisequipment