TENGLONG HONGYE
TECHNICAL TEAM
Tenglong Hongye serves as the industry university researchcooperation base of Guizhou University of Mechanical andElectrical Engineering
This project is led by Guizhou Vocational and Technical College of Mechanical and ElectricalEngineering, with a total of 13 technical personnel from multiple research institutions includingmetallurgy, chemical engineering, and waste incineration power generation research institutesparticipating in the development.
TENGLONG HONGYE
Technical highlights
Is there an upper limit on the hardness and viscosity of materials? For example, will high-hardness materials (such as rigid plastics) lead to increased equipment wear? Will high-viscosity materials (such as oil sludge) cause blockages?
There is an upper limit. High-hardness materials (such as rigid plastics) may exacerbate equipment wear; high-viscosity materials (such as oil sludge) are prone to causing blockages in pipelines or reactors and need pretreatment to reduce their viscosity.
Are there differences in the pretreatment steps for different materials? For example, do waste tires need to have their steel wires removed in advance? Does biomass need to be dried to a specific moisture content?
There are differences. Waste tires need to have their steel wires removed and be crushed; biomass needs to be dried to a moisture content of less than 10%; plastics need to have metal impurities removed; oil sludge needs to be dehydrated and deslagged. Pretreatment is customized according to the characteristics of the materials.
Are there any requirements for the particle size/dimension of materials? For example, do solid materials need to be crushed to a certain particle size or below? What is the maximum allowable particle diameter?
Yes, there are requirements. Solid materials usually need to be crushed to a specific particle size (e.g., 5-50 mm, depending on the equipment model), and the maximum allowable particle diameter generally does not exceed 100 mm to avoid clogging or insufficient cracking.
Which materials are explicitly prohibited from being processed by the equipment? (Such as certain categories of hazardous waste, explosives, etc.)
The materials explicitly prohibited from processing include: explosives (such as dynamite, nitrocellulose), strong oxidizers (such as peroxides), highly corrosive substances (such as concentrated acids/alkalis), materials containing highly toxic components (such as pesticide residues, cyanides), radioactive waste, as well as some hazardous wastes with high chlorine/fluorine content and uncontrollable pollution (such as large quantities of unpretreated mixed PVC waste).
How is the cracking efficiency of different types of materials in continuous anaerobic cracking equipment?
There is a significant difference in cracking efficiency among different materials:
- Plastics (such as PE and PP) have relatively high efficiency (80%-90%) and are easy to be converted into fuel oil;
- Rubber and waste tires come next (70%-80%), but their efficiency is affected by the need to handle impurities;
- Biomass (such as straw) has lower efficiency (50%-70%), which is affected by its fibrous structure and ash content;
- Materials containing chlorine and high impurities (such as PVC and oil sludge) have even lower efficiency and require pretreatment, otherwise their efficiency is prone to decrease.
Tire pyrolysisequipment